[c-nsp] lan switch with one 10/100/1000 copper port and many fiber Giga ports

[Steve Snodgrass]

On Mon, Jan 08, 2007 at 11:48:55AM -1000, Richard Z wrote:
> I am looking for a switch with one 10/100/1000 copper port and many
> fiber Giga ports. It is for a building application. For example, we
> drop it in the building telecom closet. Fiber ports are used to
> terminate the connections to each floor. A RJ-45 copper port is used
> to connect to a carrier.
> 
> I look at 3750-12S. It gets enough fiber ports but no copper port is
> available. The copper transceiver GLC-T is not supported on 3750.

The GLC-T works perfectly fine on the 3750-12S and is supported.
See the compatibility matrix:

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_table09186a0080446625.html

If you believe this table says otherwise, you are reading the
table wrong.  The fourth column is for CatOS support.  :-)

-- 
Steve Snodgrass * ssnodgra at pheran.com * Network and Unix Guru(?) at Large
"If you want to be somebody else, change your mind."  -Sister Hazel