[c-nsp] Serial T1/E1 Card

[Shakeel Ahmad]

load-interval will only modify the samping time of interface statistics
which you can see by show int s0/0 command.

gripping it down to 30 (the minimum) will enable you to see somewhat
realtime traffic throughput in/out (30 seconds avg. statistics).


On 1/9/07, William <willay at gmail.com> wrote:
>
> On 08/01/07, Alex <alex.arseniev at gmail.com> wrote:
> > Hello there,
> > Polling an interface every 2 secs probably would not give You meaningful
> > data with "load-interval" at 5 mins (default).
> > What is the latency across this link? With default TCP window size at 64
> > kbytes and sizeable latency there might be not enough data to fill the
> > pipe...
> > HTH
> > Cheers
> > Alex
> >
>
> Hello Alex,
>
> The latency is roughly 3-4ms across the link, when you talk about the
> load-interval at 5mins are you talking about the mib I'm querying?
>
> Cheers,
>
> Will
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>