[c-nsp] Serial T1/E1 Card

[William]

Will it also change any of the statistics I'm getting via SNMP?

Cheers,

Will

On 09/01/07, Shakeel Ahmad <shakeelahmad at gmail.com> wrote:
> load-interval will only modify the samping time of interface statistics
> which you can see by show int s0/0 command.
>
> gripping it down to 30 (the minimum) will enable you to see somewhat
> realtime traffic throughput in/out (30 seconds avg. statistics).
>
>
> On 1/9/07, William <willay at gmail.com> wrote:
> >
> > On 08/01/07, Alex <alex.arseniev at gmail.com> wrote:
> > > Hello there,
> > > Polling an interface every 2 secs probably would not give You meaningful
> > > data with "load-interval" at 5 mins (default).
> > > What is the latency across this link? With default TCP window size at 64
> > > kbytes and sizeable latency there might be not enough data to fill the
> > > pipe...
> > > HTH
> > > Cheers
> > > Alex
> > >
> >
> > Hello Alex,
> >
> > The latency is roughly 3-4ms across the link, when you talk about the
> > load-interval at 5mins are you talking about the mib I'm querying?
> >
> > Cheers,
> >
> > Will
> > _______________________________________________
> > cisco-nsp mailing list   cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
>
>