[c-nsp] Serial T1/E1 Card

[Shakeel Ahmad]

Um this is confusing for me as well, for some MIB's like frame relay i have
studied that it will affect the results but not very sure , some one else
needs to pop-in here ?

On 1/9/07, William <willay at gmail.com> wrote:
>
> Will it also change any of the statistics I'm getting via SNMP?
>
> Cheers,
>
> Will
>
> On 09/01/07, Shakeel Ahmad <shakeelahmad at gmail.com> wrote:
> > load-interval will only modify the samping time of interface statistics
> > which you can see by show int s0/0 command.
> >
> > gripping it down to 30 (the minimum) will enable you to see somewhat
> > realtime traffic throughput in/out (30 seconds avg. statistics).
> >
> >
> > On 1/9/07, William <willay at gmail.com> wrote:
> > >
> > > On 08/01/07, Alex <alex.arseniev at gmail.com> wrote:
> > > > Hello there,
> > > > Polling an interface every 2 secs probably would not give You
> meaningful
> > > > data with "load-interval" at 5 mins (default).
> > > > What is the latency across this link? With default TCP window size
> at 64
> > > > kbytes and sizeable latency there might be not enough data to fill
> the
> > > > pipe...
> > > > HTH
> > > > Cheers
> > > > Alex
> > > >
> > >
> > > Hello Alex,
> > >
> > > The latency is roughly 3-4ms across the link, when you talk about the
> > > load-interval at 5mins are you talking about the mib I'm querying?
> > >
> > > Cheers,
> > >
> > > Will
> > > _______________________________________________
> > > cisco-nsp mailing list   cisco-nsp at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > >
> >
> >
>