[c-nsp] MAC accounting on CRS-1 and Cisco 6500

[Christian Seitz]

Hello,

I try to get MAC accounting on CRS-1 working. The interface to the IXP is 
configured with

  mac-accounting ingress
  mac-accounting egress

and I can view input/output bytes and packets with "show mac-accounting 
<interface>", but how can I get this via SNMP? The information on 
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa2.shtml 
only applies to IOS, but not to IOS XR ;-/

I can find cipMacSwitchedBytes and cipMacHCSwitchedBytes only in 
CISCO-IP-STAT-MIB, but this MIB is not supported on CRS-1 regarding 
ftp://ftp.cisco.com/pub/mibs/supportlists/crs1/crs1-supportlist.html
Is there any other way besides a show-command on a CRS-1 to get the infos?


My second problem is that cipMacHCSwitchedBytes is invalid for our Cisco 
6500 with IOS 12.2(18)SXF6 running although I use "snmpwalk -v2c": 
"SNMPv2-SMI::enterprises.9.9.84.1.2.3.1.2.11 = No Such Object available on 
this agent at this OID". Reading 
ftp://ftp-sj.cisco.com/pub/mibs/supportlists/wsc6000/wsc6000-supportlist-ios.html 
the MIB should be supported (cipMacSwitchedBytes is working, but those 
32bit counters are to small so I tried to use the 64bit counters). Has 
anyone tried the 64bit counters on a catalyst 6500 with IOS?

Greetings from Berlin,

Chris
-- 
Christian Seitz <chris at in-berlin.de>     http://www.in-berlin.de/