[c-nsp] 7204 PA-T3 PRoblem

[Gert Doering]

Hi,

On Tue, Jan 09, 2007 at 01:14:23PM -0500, Jayson Navitsky wrote:
> I have a PA-T3 in a 7204 (non VXR) NPE-200 for some reason no matter
> what I do I cannot get this card to recognize any circuit attached to
> it or give the appropriate lights.  I have noticed in show controllers
> showing a "Last FEAC code received: unkonwn code 3F", (do note the
> misspelling) Google has turned up nothing on this.
>
> With a hard loopback to the card here's the ouput:

Is that with "clock source internal"?

If not, you might want to try this - someone has to provide clocking,
and if you don't tell the card, it won't know...

("Usually" the PAs will find some noise that could be used for clocking,
and enter some sort of free-running mostly-clocked mode, but if you have
little electric noise around, it might not do that).

This is just a stab in the dark, though...

gert

-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de