[c-nsp] 7204 PA-T3 PRoblem

[Oliver Boehmer (oboehmer)]

cisco-nsp-bounces at puck.nether.net <> wrote on :

> Hi,
> 
> I have a PA-T3 in a 7204 (non VXR) NPE-200 for some reason no matter
> what I do I cannot get this card to recognize any circuit attached to
> it or give the appropriate lights.  I have noticed in show controllers
> showing a "Last FEAC code received: unkonwn code 3F", (do note the
> misspelling) Google has turned up nothing on this.
> 
> I have tried:
> -New boot loader
> -Various IOS versions
> -Swapping out the PA-T3 with another one
> -Different slots

So re-seating the card didn't help, and a new PA-T3 didn't help either?
Cases where we've seen "Last FEAC code received: unkonwn code 3F"
usually pointed to a HW fault on the PA, and sometimes were corrected
after re-seating the PA.

	oli