[c-nsp] FWSM activation kaey

[Voll, Scott]

If it makes you feel any better, mine is the same and it's working just
fine.

Scott

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Tassos
Chatzithomaoglou
Sent: Wednesday, January 10, 2007 9:38 AM
To: cisco-nsp
Subject: [c-nsp] FWSM activation kaey

In the following FWSM module i haven't used any activation key and i'm
getting "The Running Activation Key is not valid".
So, do i need an activation key and why?

============================================================
fwsm# sh activation-key
Serial Number:  xxxxxx
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000
The Running Activation Key is not valid, using default settings:

Licensed features for this platform:
Maximum Interfaces          : 300
Inside Hosts                : Unlimited
Failover                    : Active/Active
VPN-DES                     : Enabled
VPN-3DES-AES                : Enabled
Cut-through Proxy           : Enabled
Guards                      : Enabled
URL Filtering               : Enabled
Security Contexts           : 2
GTP/GPRS                    : Disabled
VPN Peers                   : Unlimited

The flash activation key is the SAME as the running key.
============================================================


I know that if i want more Security Contexts than the default 2+1, then
i need to buy the appropriate license (20,50,100,250), but 
does it have any relationship with the activation key?


--
Tassos

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/