[c-nsp] Multiple PPPoE VPDN

[Joe Maimon]

David Coulson wrote:

> group as those delivered via ATM. I'd like to be able to distingish 
> between these two, or at the very least have two virtual-templates 
> defined for each service.
> 

bba-group

> My main problem is that the PPPoE sessions (or rather the virtual-access 
> interface) across the FastEthernet have this:
> 
>    MTU 1472 bytes, BW 768 Kbit, DLY 100000 usec,
> 
> I don't know if the 'BW' makes a difference,

Only for QoS calculation and EIGRP

> but we need to do better 
> than 768k on that interface. 

Actually probably not.

> Great for DSL customers. For 10Meg Ethernet 
> customers, not so much.

You could always send a bandwidth statement as a cisco vsa from radius like

Cisco-Avpair	+= "lcp:interface-config=bandwidth 10240"

> Looks like I can't have multiple PPPoE VPDN groups, so is there 
> something within the VPDN group where I can look at the domain part of 
> the username (if it exists) and select a different template?

bba-group

> Am I missing something obvious, or do I need to rethink how I'm doing this?
> 
> David

Happens to the best of us