[c-nsp] Pre-made loopback plugs

[Tony Varriale]

I use the t1 loopbacks from here...

http://www.smartronixstore.com/index.cfm?fuseaction=category.display&category_ID=1&CFID=159308&CFTOKEN=40869321

tv
----- Original Message ----- 
From: "james edwards" <lists.james.edwards at gmail.com>
To: <cisco-nsp at puck.nether.net>
Sent: Thursday, January 25, 2007 3:24 PM
Subject: [c-nsp] Pre-made loopback plugs


>I am looking for a source pre-made loopback plugs for both standard
> T-1 and 56k DDS T-1.
> Yes, I make these for myself all the time but for this project I would
> like to have pre-made ones.
> Ideally I was hoping Cisco made them, as I have a vendor that can sell
> Cisco, but I cannot find any on Cisco's site. Does anyone know of a
> source of these, Cisco or not ?
>
> Thanks,
>
>
> -- 
> James H. Edwards
> Senior Network Systems Administrator
> Judicial Information Division
> jedwards at nmcourts.gov
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/