[c-nsp] 3750 stack slave switch replacement

[William]

Vikas,

I think you need to power everything off in the stack before adding or
removing any more switches. Also check the logs on both master/slave
switches, typically you should see the switch join and either complain
about code version or go through the cool upgrade process without
touching it.

cheers,

w

On 27/01/07, Vikas Sharma <vikassharmas at gmail.com> wrote:
> Hi,
>
> I am using two 3750 switches as a stack switch. One switch is master. I have
> to replace these switches with the new two 3750 switches I have. To do that
> I have removed the slave switch and powered on the new switch (which should
> become slave now). The problem is new switch is able to recognize the master
> switch but it is not booting properly and no configuration is getting copied
> from Master to slave. I have made both switches password same (older master
> password is same as newer switch). Still it can not copy the configuration
> though it should have done it as both switches are the part of stack. pls
> help...
>
> Regards
> Vikas Sharma
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>