[c-nsp] 3750 stack slave switch replacement

[Alexander Koch]

Vikas,

what is the log saying? It usually gives pretty good info
on what the issue is in such cases. I bet you will find your
answer there.

Is 'show sdm prefer' matching on old and new? Is the IOS the
same? Things like that...

Alexander

On Sat, 27 January 2007 13:43:44 +0530, Vikas Sharma wrote:
> Hi,
> 
> I am using two 3750 switches as a stack switch. One switch is master. I have
> to replace these switches with the new two 3750 switches I have. To do that
> I have removed the slave switch and powered on the new switch (which should
> become slave now). The problem is new switch is able to recognize the master
> switch but it is not booting properly and no configuration is getting copied
> from Master to slave. I have made both switches password same (older master
> password is same as newer switch). Still it can not copy the configuration
> though it should have done it as both switches are the part of stack. pls
> help...
> 
> Regards
> Vikas Sharma