[c-nsp] ARP table fwsm through snmp

[David LaPorte]

I asked about a year and a half ago to have this implemented, but I
don't believe it's made it in yet.

Dave

Bernard wrote:
> Hi,
> 
> Is it possible to get the arp table from the fwsm (using mainly Cisco 
> Firewall Services Module Version 3.2(1)) through snmp.
> The device is manageable through snmp (interface status, load, system 
> info etc....) however when I try to get the arp table through snmp with 
> snmpwalk I don't get any response back from the fwsm.
> snmpwalk -On -v1 -c community x.x.x.x .1.3.6.1.2.1.4.22.1.3
> 
> snmp config of the fwsm
> snmp-server host svi-link x.x.x.x community whatever
> snmp-server community whatever
> 
> Hope anyone knows howto.
> 
> Bernard
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/