[c-nsp] ARP table fwsm through snmp

[Bernard]

Hi,

Is it possible to get the arp table from the fwsm (using mainly Cisco 
Firewall Services Module Version 3.2(1)) through snmp.
The device is manageable through snmp (interface status, load, system 
info etc....) however when I try to get the arp table through snmp with 
snmpwalk I don't get any response back from the fwsm.
snmpwalk -On -v1 -c community x.x.x.x .1.3.6.1.2.1.4.22.1.3

snmp config of the fwsm
snmp-server host svi-link x.x.x.x community whatever
snmp-server community whatever

Hope anyone knows howto.

Bernard