[c-nsp] Regarding HSSI Loop back test

Gert Doering gert at greenie.muc.de
Fri Jul 6 11:06:40 EDT 2007


Hi,

On Fri, Jul 06, 2007 at 04:47:55PM +0300, krishna at siticable.co.ug wrote:
> surpricingly the interface stats also looks fine.
> 
> Hssi2/0 is up, line protocol is up
[..]
>      696594 input errors, 578459 CRC, 0 frame, 90706 overrun, 720 ignored, 
> 27429
>  abort

Welll... I wouldn't call this "fine".  Something in your hardware setup
is not right - either the HSSI cabling (never heard of using a LVD
converter here...) or the actual CSU/DSU box configuration.

The interface shouldn't show CRC errors.  Ever.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de


More information about the cisco-nsp mailing list