[c-nsp] 7200 question

Rodney Dunn rodunn at cisco.com
Mon Jul 9 12:02:52 EDT 2007


On Mon, Jul 09, 2007 at 11:41:49AM -0400, Jeff Crowe wrote:
> Hi all,
> 
> I am trying to configure a router that will be able to handle the following:
> 
> Multichannel T3 (probably PA-MC-T3),
> Couple of routed FE ports
> Gig Uplink to switching fabric

7206 with NPE-G1. If you are looking at doing much MLPPP look at the
enhanced PA-MC-T3 that can do MLPPP in the hardware chip on the PA.

Rodney

> 
> I am thinking a 7200, but what kind of processing engine should I be looking
> at?  This unit will be primarily used for T1 aggregation and not too much
> else.  I could probably even start of with a PA-8T1 card instead of the T3
> card.
> 
> Also - if anyone knows of a unit that can take a Multichannel DS3 and turn
> it into vlans over Eth (Gig/FE) please let me know.  I have looked at the
> Turin unit - but 12 DS3's are overkill for my purposes.  I am looking at 1
> T3.  It would need to do MLPPP on the DS1 level - I am not too worried about
> the DS0 as we don't offer fractional T1.
> 
> Thanks,
> 
> Jeff
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list