[c-nsp] WIC errors

[Neal R]

  Is it genuine Cisco or a counterfeit? Hint ... 92% off sales on Ebay
of Cisco ... aren't.

  If not that what version of software are you running? Seems unlikely
this would be a code issue but sometimes I ask and find its blah.bleh.1T
or something like that for the version, which is definitely cause for
considering an upgrade.


Seth Mattinen wrote:
> I'm seeing the following errors on one of my WIC modules:
>
> 000342: Jul  9 03:58:01.683: %SERVICE_MODULE-4-WICNOTREADY: Unit 
> Serial0/1/0 not ready for next command -Traceback= 0x41173B5C 0x40371894 
> 0x40371DFC 0x40369AF0 0x40369DB4 0x4036DDAC 0x4036E9E8 0x411B2DF0 
> 0x411CEB64 0x42522ECC 0x42515C0C 0x42183F44 0x42183F28
>
> 000343: Jul  9 03:58:01.687: %SERVICE_MODULE-4-REQUESTOVERLOAD: Unit 
> Serial0/1/0 - module request overload - lock access timeout -Traceback= 
> 0x41173B5C 0x40369AAC 0x4036EF14 0x4036A22C 0x4036A9E4
>
> 000344: Jul  9 03:58:01.687: %SERVICE_MODULE-4-ALARMFAILURE: Unit 
> Serial0/1/0 - Could not access alarm status - disabling alarm processing
>
> Any ideas?
>
> ~Seth
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>