[c-nsp] WIC errors

Mon Jul 9 00:04:32 EDT 2007

I'm seeing the following errors on one of my WIC modules:

000342: Jul  9 03:58:01.683: %SERVICE_MODULE-4-WICNOTREADY: Unit 
Serial0/1/0 not ready for next command -Traceback= 0x41173B5C 0x40371894 
0x40371DFC 0x40369AF0 0x40369DB4 0x4036DDAC 0x4036E9E8 0x411B2DF0 
0x411CEB64 0x42522ECC 0x42515C0C 0x42183F44 0x42183F28

000343: Jul  9 03:58:01.687: %SERVICE_MODULE-4-REQUESTOVERLOAD: Unit 
Serial0/1/0 - module request overload - lock access timeout -Traceback= 
0x41173B5C 0x40369AAC 0x4036EF14 0x4036A22C 0x4036A9E4

000344: Jul  9 03:58:01.687: %SERVICE_MODULE-4-ALARMFAILURE: Unit 
Serial0/1/0 - Could not access alarm status - disabling alarm processing

Any ideas?

~Seth