[c-nsp] Synchronize / mutal redistribute global and vrf BGP routing table

[Dennis Breithaupt]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

that seems to be a tricky one :)

[...]
> As the physical router has only one BGP router id of course BGP from vrf
> ABC would not peer with the "global BGP" on the same router. Also route
> reflection from the global router over a RR to the "vrf-BGP" does not
> work, because it says that itself was the originator and denies to
> install the route.
[...]

For the records: After some in-depth searches in CCO we found out the
following:

- - Per VRF bgp router-id is a feature that exists, but only in IOS 12.2SR
and 7200 platforms.

http://www.cisco.com/en/US/products/ps6922/products_feature_guide09186a0080667452.html

So that doesn't fit for us.

We'll rework the design, so that full mesh of physical and vrf-routers
is not neccessary in our setup.


Regards,

Dennis
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (MingW32)

iD8DBQFGk6dmT+6It6VVS5kRAvZyAJ99xFuegy82B9+6FKwBCJOaYTpQgACfd0sJ
izlFgvttIQfDrA1aH72z65k=
=7OCs
-----END PGP SIGNATURE-----