[c-nsp] QoS RSP720

coueffe charly charlyc at wanadoo.fr
Tue Jul 10 14:52:24 EDT 2007


Hi,

I'm using a supervisor card RSP720. I'll use the QoS, but the command
fair-queue is not implementing with this IOS
(7600rsp72043-adventerprisek9-mz.122-33.SRB1.bin).

If I watch the queueing strategy, It's the WWR and with the command "sh
int gi2/1" it's fifo. It's normal ?

#show queueing interface gigabitEthernet 2/1
Interface GigabitEthernet2/1 queueing strategy:  Weighted Round-Robin
  Port QoS is enabled
  Trust state: trust COS
  Extend trust state: not trusted [COS = 0]
  Default COS is 0
    Queueing Mode In Tx direction: mode-cos
    Transmit queues [type = 1p3q8t]:
    Queue Id    Scheduling  Num of thresholds
  
GigabitEthernet2/1 is down, line protocol is down (notconnect)
  Hardware is C6k 1000Mb 802.3, address is 001b.0caf.37d8 (bia
001b.0caf.37d8)
  Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 
  Queueing strategy: fifo

Regards,

Charly




More information about the cisco-nsp mailing list