[c-nsp] Debug redistribute

[Peter Nyamukusa]

 Hi Rick
 
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On
> Behalf Of Rick
> Sent: Monday, July 16, 2007 11:55 PM
> To: c-nsp
> Subject: [c-nsp] Debug redistribute
> 
>     Is there an equivalent command for debugging redistribution from one
> OSPF process to another, on the same 7600 box with a Sup720?
Do sh ip protocols to see if you are redistributing the processes

Also do sh ip route on a different route to see if the routes are showing up
in the routing table, they should show up as O E2 or O E1 depending on how
you have redistributed them

You can also do a debug ip ospf events on the router you are doing the
redistribution ( use with caution especially on production equipment as it
is very resource intensive )

> 
>     The OSPF neighbor state is Full, and I see routes in one database that
> are not in the other (redistribution target).

You need to do 2-way redistribution

Hope this helps

Cheers
Peter

> 
>     My troubleshooting window wont be until next week...are there any show
> commands that can determine why?
> 
> 
> 
> 
> Thanks,
> Rick
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/