[c-nsp] configure 876 with qos

[Rodney Dunn]

On Tue, Jul 17, 2007 at 05:34:39PM +0200, Ahmad Cheikh-Moussa wrote:
> Hi Guys,
> 
> can someone tell me, when queuing is done ?
> Comes queuing before or after encryption ?

Ater.

> 
> Another question is, I configured a simple priority-group
> and assigned it to the vlan interface. This worked without
> any problem. Is this a good idea ?

No. That's the old legacy PQ implemenation. Don't do it.

Use MQC with a policy map and a priority class.

rodney

> 
> priority-list 1 protocol ip high list 110
> 
> int vlan 1
>  priority-group 1
> 
> 
> Regards,
>  Ahmad
> 
> 
> 
> 
> -- 
> Ahmad Cheikh-Moussa 
> NetUSE AG
> Dr.-Hell-Stra?e, 24107 Kiel, Germany
> Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
> Service: Service at NetUSE.DE --  http://NetUSE.DE/
> 
> Vorstand: Andreas Seeger (Vorsitz), Dr. Roland Kaltefleiter, Dr. Joerg Posewang
> Aufsichtsrat: Detlev Huebner (Vorsitz)
> Sitz der AG: Kiel, HRB 5358 USt.ID: DE156073942
> 
> Diese E-Mail enthaelt vertrauliche oder rechtlich geschuetzte Informationen.
> Das unbefugte Kopieren dieser E-Mail oder die unbefugte Weitergabe der
> enthaltenen Informationen ist nicht gestattet.
> 
> The information contained in this message is confidential or protected by
> law. Any unauthorised copying of this message or unauthorised distribution
> of the information contained herein is prohibited.
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/