[c-nsp] 12.2SR static NAT route-map

[Scott Mace]

Is the static NAT route-map feature supported in hardware on the PFC3B 
in 12.2SR?

Something like:

int g2/1
  ip address 10.50.1.1 255.255.255.0
  ip nat outside
int g2/2
  ip address 10.55.1.1 255.255.255.0
  ip nat outside
int g2/3
  ip address 10.1.1.1 255.255.255.0
  ip nat inside

ip nat inside source static 10.1.1.10 172.16.15.1 route-map test1
ip nat inside source static 10.1.1.10 192.168.1.50 route-map test2

access-list 111 permit ip host 10.1.1.10 10.8.0.0 0.0.255.255
access-list 112 permit ip host 10.1.1.10 192.168.100.0 0.0.0.255

route-map test1 permit 10
  match ip address 111
  set ip next-hop 10.50.1.2

route-map test2 permit 10
  match ip address 112
  set ip next-hop 10.55.1.2