[c-nsp] 12.2SR static NAT route-map

[Rodney Dunn]

We don't support static nat with route-maps at all.

We had a bug to block the CLI but it appears it got
exposed again.

I'm filing a bug now to get that CLI blocked again.

Rodney

On Tue, Jul 24, 2007 at 02:13:27AM -0500, Scott Mace wrote:
> Is the static NAT route-map feature supported in hardware on the PFC3B 
> in 12.2SR?
> 
> Something like:
> 
> int g2/1
>   ip address 10.50.1.1 255.255.255.0
>   ip nat outside
> int g2/2
>   ip address 10.55.1.1 255.255.255.0
>   ip nat outside
> int g2/3
>   ip address 10.1.1.1 255.255.255.0
>   ip nat inside
> 
> ip nat inside source static 10.1.1.10 172.16.15.1 route-map test1
> ip nat inside source static 10.1.1.10 192.168.1.50 route-map test2
> 
> access-list 111 permit ip host 10.1.1.10 10.8.0.0 0.0.255.255
> access-list 112 permit ip host 10.1.1.10 192.168.100.0 0.0.0.255
> 
> route-map test1 permit 10
>   match ip address 111
>   set ip next-hop 10.50.1.2
> 
> route-map test2 permit 10
>   match ip address 112
>   set ip next-hop 10.55.1.2
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/