[c-nsp] Bridging Across an OC3

[Bruce Robertson]

This is what I'd recommend:  
http://www.rad.com/Article/0,6583,33360-Gigabit_Ethernet_over_STM_1_OC_3_NTU,00.html

Keep the Ciscos out of it, except to supply the GE interfaces to talk to 
the RAD box.

Devon True wrote:
> All:
>
> I have a customer who is looking to bridge their traffic across an OC3. 
> (They want to use the same subnet on both sides of the circuit). It 
> looks like IRB is the method to use, but I am concerned about 
> performance issues. Normally there is very little traffic across the 
> OC3, but in a disaster, they could push 75-100Mbps across it.
>
> Any recommendations on hardware/software are appreciated!
>
> --
> Devon
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>
>
>