[c-nsp] T1 to Ethernet Tunnel

[Joe Maimon]

Frame-Relay to Ethernet interworking is available in 12.411T IIRC.


Robert Blayzor wrote:

> I have a unique situation where a customer needs a point-to-point link.
>    However the media on both ends is not the same.  On one end we have
> can only do T1, on the other side, Ethernet.
> 
> As the provider we want to do this as a straight Layer2 play and not get
> into the customers IP routing. (if they're using IP at all, I assume
> they are)
> 
> Basically what we have is:
> 
> T1 --> 7200 ---> IP cloud -----Ethernet----> 184x ---Ethernet-->endpoint
> 
> 
> I'm thinking an L2TPv3 tunnel beetween the 7200 and the 1841, but is
> that doable by tunneling the T1 to Ethernet?  THe IP cloud has QoS and I
> want to tag these L2TPv3 packets for EF (as they will more than likely
> be carrying voice)  Possible?
> 
> TIA
>