[c-nsp] cisco 2811 doesn't route to the internet

[R.L. Nevot]

Perhaps you have only one public IP address? are you performing NAT?
post your configuration might help

Regards

On 7/30/07, fernando fernandes <op306685b at mail.telepac.pt> wrote:
>
> hi there...
> i got a cisco 2811 ... with and hwic-adsl ...
> it syncs ok the dsl line .. and it does the ppp connection..
> but then it doesn't route anything.. don't have acess to outside....
> the ip route its in place.... but no go :(
> any1 can give me a hand?
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>