[c-nsp] cisco 2811 doesn't route to the internet

Stephen Wilcox steve.wilcox at packetrade.com
Mon Jul 30 09:24:40 EDT 2007


compare to this.. i assume you are missing routing or ppp isnt really up etc

http://www.thedogsbollocks.co.uk/tech/cisco837-adsl.txt

On Mon, Jul 30, 2007 at 03:15:54PM +0200, R.L. Nevot wrote:
> Perhaps you have only one public IP address? are you performing NAT?
> post your configuration might help
> 
> Regards
> 
> On 7/30/07, fernando fernandes <op306685b at mail.telepac.pt> wrote:
> >
> > hi there...
> > i got a cisco 2811 ... with and hwic-adsl ...
> > it syncs ok the dsl line .. and it does the ppp connection..
> > but then it doesn't route anything.. don't have acess to outside....
> > the ip route its in place.... but no go :(
> > any1 can give me a hand?
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list