[c-nsp] HSRP with 2 LAN switches

Ben Steele ben at internode.com.au
Wed Jun 6 23:17:28 EDT 2007


You could do it with event manager combined with ip sla, not sure if 
your equipment supports it though.

Ben

Scott Dunn wrote:
> Hi Group,
>
> I had 2 x 3835 running eBGP for WAN redundancy (primary/shadow) and
> running HSRP for LAN failover to 1 switch. I've recently added a
> second switch, so now each 3825 is connected to 1 switch. The HSRP is
> working except for a the LAN interfaced failure (unplugged) on a 3825,
> the BGP continues to route but the traffic has nowhere to go. If there
> a way to tear down the external BGP if the LAN interface goes down?
>
> I've looked at Enhanced Object Tracking, but that seems only to apply
> to the HSRP and can't take any action on BGP
>
> Thanks for the help
>
> Scott
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>   

-- 
Ben Steele
Cisco Field Engineer
Cisco Systems Engineer
Corporate Projects Team
Internode Systems Pty Ltd
Ph: 08 8228 2968



More information about the cisco-nsp mailing list