[c-nsp] Qos pre-classify

[Ian MacKinnon]

Hi All,

Given the config below for a vpn tunnel, when I add the command "qos
pre-classify" to the crypto map and the tunnel interface, I get really
bad slowdown of traffic.

2. Questions, is anybody using qos pre-classify to prioritise voice?
And I just wonder if trying to shape the tunnel and shape the phyiscal
interface is wrong.

thanks

policy-map LLQ
 class voice
  priority 2000
 class class-default
  fair-queue
policy-map shape
 class class-default
  shape average 2000000
  service-policy LLQ

crypto map GRE 10 ipsec-isakmp
 set peer yyy.yyy.yyy.38
 set transform-set myset1
 match address 101

interface Tunnel0
 ip address 10.1.0.2 255.255.255.252
 tunnel source xxx.xxx.xxx.130
 tunnel destination yyy.yyy.yyy.38
 service-policy output shape
!
interface FastEthernet0
 description wan interface
 ip address xxx.xxx.xxx.130 255.255.255.252
 ip nat outside
 crypto map GRE
 service-policy output shape


-- 

This email and any files transmitted with it are confidential and intended 
solely for the use of the individual or entity to whom they are addressed.  
If you have received this email in error please notify the sender. Any 
offers or quotation of service are subject to formal specification.  
Errors and omissions excepted.  Please note that any views or opinions 
presented in this email are solely those of the author and do not 
necessarily represent those of Lumison, nplusone or lightershade ltd.  
Finally, the recipient should check this email and any attachments for the 
presence of viruses.  Lumison, nplusone and lightershade ltd accepts no 
liability for any damage caused by any virus transmitted by this email.

-- 
-- 
Virus scanned by Lumison.