[c-nsp] 6500 not supporting md5 on HSRP?

[Tim Stevenson]

It's not available yet, target is the "whitney 1" release.

Tim

At 02:17 PM 6/7/2007 +0200, Rutger Bevaart opined:
>Hello list,
>
>On a sup32 running s3223-ipservicesk9_wan-mz.122-18.SXF9.bin I am unable
>to configure md5 authentication HSRP for VLAN interfaces...
>
>On a 3560 I am able to (under interface configuration) do:
>
>"standby 1 authentication md5 key-string 7 <encrypted md5 string>"
>
>I checked with sup32 and sup720's, and it does not support md5. Is this
>available in other releases or just a missing feature on the MSFC's?
>
>regards,
>Rutger
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Data Center BU
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.