[c-nsp] 6500/7600 boot issues

[Jon Lewis]

On Thu, 7 Jun 2007, David Prall wrote:

> You just set the config register, then confirm with the remote commands.
> Some where in the mix it didn't synchronize between the two. Had this
> problem on a 6500, spent 4 hours trying to figure out why it was happening.
> I now confirm and verify.

ok...so I guess you do that on the msfc, and it's supposed to sync with 
the sup?  It looks like that worked.

# rem com sw sh ver | inc register
Configuration register is 0x2142 (will be 0x2102 at next reload)

Unfortunately, I won't know if that's cleared the problem until Tuesday 
night.

----------------------------------------------------------------------
  Jon Lewis                   |  I route
  Senior Network Engineer     |  therefore you are
  Atlantic Net                |
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________