[c-nsp] DS-3 Module and Cable for Cisco 2800/7200 Series Router

[Raymond Ho]

It can be found online. Your Telco would terminate it as a BNC connector on both a-end and b-end.


Zahid  Hassan  wrote on Mon, Jun 11, 2007 at 08:45:07PM SGT :
| Dear All,
| 
| 
| Can anyone suggest the right DS-3 module and cable for Cisco 7200 and 2800 series routers.
| 
| As per Cisco documentation, a PA-E3 can be used for 7200 and a NM-1T3/E3 for 2800 series.
| 
| Please can anyone comment of this, also would appreciate any suggestion on the cables to be used to connect to these cards and to the supplier's termination equipment.
| 
| 
| 
| Thanks in advance.
| 
| 
| 
| Zahid 
| 
| -- 
| Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
| Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
| _______________________________________________
| cisco-nsp mailing list  cisco-nsp at puck.nether.net
| https://puck.nether.net/mailman/listinfo/cisco-nsp
| archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Regards,
Raymond Ho
----------
PGP Key ID 478C4F42