[c-nsp] Tools for making config backups

[Jason Plank]

Totally agree. Rancid gives you what you need based on your requirements
below. At my last place of employment we went away from Cisco works and
towards rancid. Good stuff.


On 6/20/07 8:44 AM, "William" <willay at gmail.com> wrote:

> Hi,
> 
> You have already mentioned RANCID which I think is the most mature and
> stable opensource project out there for this type of task. I'm running
> it on FreeBSD to grab various devices and its nothing short of
> fantastic. Personally I would look no further.
> 
> Cheers,
> 
> Will
> 
> On 20/06/07, chiel <chiel at gmx.net> wrote:
>> I'm looking for some program that will make backups of a cisco config from
>> serveral devices.
>> I have taken a quick look at Rancid for this but I would like to know if
>> there are any similar programs out there.
>> 
>> My requirements:
>> -Security (ssh or snmpv3)
>> -Opensource (so that I can run it on a linux system)
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Jason Plank, CCIE# 16560
Senior Network Engineer
Conde Nast Publications
1201 North Market St.
Wilmington, DE 19808
Email: Jason_Plank at CondeNast.com
Office: 302-830-4910
Cell: 302-290-0387