[c-nsp] FE switchport output drops

Church, Charles cchurch at multimax.com
Mon Jun 25 09:31:00 EDT 2007


Is the port configured with anything out of the ordinary, broadcast
storm suppression, policing, etc?  Anything in the logs showing up
involving layer 2 or 3 stuff - unresolved MAC addresses, ARP?  Backplane
issue maybe on that card or CPU on the sup?  Did it just start doing
this?  If so, what changed?

Chuck

-----Original Message-----
From: Ras [mailto:jeekay at gmail.com] 
Sent: Monday, June 25, 2007 9:02 AM
To: Church, Charles
Cc: c-nsp
Subject: Re: [c-nsp] FE switchport output drops

On 25/06/07, Church, Charles <cchurch at multimax.com> wrote:
>         Do the speed and duplex match on both sides?  Does the Juniper

> interface give you any clue what's going on?  Any output errors on the

> Cisco side?

Link is set to 100/Full on both sides. There are no errors at all on
either side and the Juniper isn't reporting anything untoward.


More information about the cisco-nsp mailing list