[c-nsp] BGP Peer Problem with 7200-G2

[Skeeve Stevens]

Ok.. I'm going to bed! Sheesh

 

.Skeeve

 

From: Ozgur Guler [mailto:ozgur11 at gmail.com] 
Sent: Friday, 29 June 2007 12:22 AM
To: skeeve at skeeve.org
Cc: Cisco-nsp
Subject: Re: [c-nsp] BGP Peer Problem with 7200-G2

 

Router is correct.
% Create the peer-group first!

On 6/28/07, Skeeve Stevens <skeeve at skeeve.org> wrote: 


Hi Guys,

It's late here and either I am going mad or this router is on drugs. 


GS-7204G2-BORDER uptime is 3 weeks, 6 days, 12 hours, 15 minutes
System returned to ROM by reload at 11:46:27 AEST Fri Jun 1 2007
System restarted at 11:48:07 AEST Fri Jun 1 2007
System image file is "disk2: c7200p-advipservicesk9-mz.124-11.T2.bin"

-----
GS-7204G2-BORDER(config)#router bgp xxxx
GS-7204G2-BORDER(config-router)#
GS-7204G2-BORDER(config-router)# neighbor x-eq remote-as xxxx
% Create the peer-group first 
GS-7204G2-BORDER(config-router)# neighbor x-eq update-source
GigabitEthernet0/1.602
% Specify remote-as or peer-group commands first
GS-7204G2-BORDER(config-router)# neighbor x-eq soft-reconfiguration inbound 
% Specify remote-as or peer-group commands first
GS-7204G2-BORDER(config-router)# neighbor x-eq prefix-list BADRANGES in
% Specify remote-as or peer-group commands first
GS-7204G2-BORDER(config-router)# neighbor x-eq route-map CIRRUS-EQ-PEER-IN 
in
% Specify remote-as or peer-group commands first
GS-7204G2-BORDER(config-router)# neighbor cirrus-eq route-map
CIRRUS-EQ-PEER-OUT out
% Specify remote-as or peer-group commands first
GS-7204G2-BORDER(config-router)# neighbor x-eq maximum-prefix 1000 95 
% Specify remote-as or peer-group commands first
GS-7204G2-BORDER(config-router)# neighbor 58.96.x.x peer-group cirrus-eq
% Configure the peer-group first
GS-7204G2-BORDER(config-router)# neighbor 58.96.x.x activate 
% Specify remote-as or peer-group commands first
GS-7204G2-BORDER(config-router)#
----

I can't seem to win either way.  I've done everything, but it won't take
this new peer for some reason. 

neighbor 58.96.x.x peer-group cirrus-eq says to Configure the peer-group
first, which is like, what I thought I was doing with this command.

What obvious thing am I screwing up?

Thanks guys.

.Skeeve



--
Skeeve Stevens, RHCE
skeeve at skeeve.org / www.skeeve.org
Cell +61 (0)414 753 383 / skype://skeeve

eintellego - skeeve at eintellego.net - www.eintellego.net
--
I'm a groove licked love child king of the verse
Si vis pacem, para bellum


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp 
archive at http://puck.nether.net/pipermail/cisco-nsp/