[c-nsp] problem running MPLS on 6509-E 12.2(18)SXF7

Reinhold Fischer Reinhold.Fischer at gmx.net
Thu Mar 1 09:24:14 EST 2007


Nasir,

looks like you are running the modular IOS flavour on this box.
As far as i know modular IOS has no MPLS yet. Run the normal,
non-modular version and you should be fine.

regards
Reinhold

On Thu, Mar 01, 2007 at 02:09:07PM -0000, nasir.shaikh at bt.com wrote:
> Hi folks,
> 
> I have a couple of 6509-Es with sup720-3b running 12.2(18)SXF7 advanced
> ip services ssh IOS which do not seem to support mpls. An excerpt from
> sh version:
> 
>  
> 
> System image file is
> "sup-bootdisk:s72033-advipservicesk9_wan-vz.122-18.SXF7.bin
> 


Nasir,

looks like you are running the modular IOS flavour on this box.
The "vz" in the image file name indicates this.

As far as i know modular IOS has no MPLS yet. Run the normal,
monolithic version and you should be fine.

regards
Reinhold

>  
> 
> cisco WS-C6509-E (R7000) processor (revision 1.3) with 491520K/32768K
> bytes of .
> 
> Processor board ID SMC104600GY
> 
> SR71000 CPU at 600Mhz, Implementation 1284, Rev 1.2, 512KB L2 Cache
> 
> Last reset from s/w reset
> 
> 1 Virtual Ethernet/IEEE 802.3 interface
> 
> 12 Gigabit Ethernet/IEEE 802.3 interfaces
> 
> 8 Ten Gigabit Ethernet/IEEE 802.3 interfaces
> 
> 1917K bytes of non-volatile configuration memory.
> 
>  
> 
> 65536K bytes of Flash internal SIMM (Sector size 512K).
> 
> Configuration register is 0x2102
> 
>  
> 
> Patching is not available since the system is not running from an
> installed image
> 
>  
> 
>  
> 
> 6509E#conf t
> 
> Enter configuration commands, one per line.  End with CNTL/Z.
> 
> 6509E(config)#mpls ip
> 
>                ^
> 
> % Invalid input detected at '^' marker.
> 
>  
> 
> 6509E(config)#m?
> 
> mac   mac-address-table  map-class  map-list  memory
> 
> menu  mls                modemcap   module    monitor
> 
> mop   multilink          mwam
> 
>  
> 
> I have bought these switches to act as the core of my Campus MPLS
> backbone. Software feature navigator shows that this image should
> support MPLS.
> 
>  
> 
> Am I missing something here?
> 
>  
> 
> My 6504-Es with sup32-10GE-3b have no problems with mpls.
> 
>  
> 
> Please help!
> 
>  
> 
> Kind regards
> 
>  
> 
> Nasir Shaikh 
> 
>  
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list