[c-nsp] High CPU for XDR mcast (What the heck is this?)

[Rodney Dunn]

This must be old code because it doesn't break out the XDR message types.

Seems like something may have broken with IPC to the LC's.

On Thu, Mar 15, 2007 at 11:27:06AM -0400, David Coulson wrote:
> Rodney Dunn wrote:
> > What does 'sh cef linecard detail' or is it 'sh cef line internal'
> > say?
> 
> Not sure why it says slot 3, rather than slot 0 - There's an RSP in slot
> 3, unless it's not actually mapped to the physical slot 1:1. The GEIP I
> reloaded is in slot 0.
> 
> CEF linecard slot number 3, status up
>  Send failed 0, Out Of Sequence 0, drops 0
>  Linecard CEF reset 0, reloaded 0
>  Total elements queued:
>  330347 elements sent
>  0 elements cleared
>  Total elements cleared:
>  Input  packets 0, bytes 0
>  Output packets 0, bytes 0, drops 0
> 
>  CEF Table statistics:
>  Table name                Status
>  Default-IP-Routing-Table  Active, sync, table-up
> 
> CEF linecard slot number 6, status disabled
>  Send failed 0, Out Of Sequence 0, drops 0
>  Linecard CEF reset 0, reloaded 0
>  Total elements queued:
>  608285 elements sent
>  0 elements cleared
>  Total elements cleared:
>  Input  packets 17484702, bytes 6025365346
>  Output packets 161340, bytes 13284018, drops 11
> 
>  CEF Table statistics:
>  Table name                Status
>  Default-IP-Routing-Table  Active, table-disabled
> 
> CEF linecard slot number 4, status up
>  Send failed 0, Out Of Sequence 0, drops 0
>  Linecard CEF reset 0, reloaded 0
>  Total elements queued:
>  607089 elements sent
>  0 elements cleared
>  Total elements cleared:
>  Input  packets 15929597, bytes 11498634673
>  Output packets 470614, bytes 95740677, drops 0
> 
>  CEF Table statistics:
>  Table name                Status
>  Default-IP-Routing-Table  Active, table-up