[c-nsp] Show system jumbomtu

[Sukumar Subburayan]

We had supported 'show system mtu' cli only on the cat4k.

On the 6k, since the configured system MTU can be viewed in the running 
config, it command to show the value was not added.

we never got to implement 'show system jumbomtu'.

Please refer to CSCdy28580

sukumar




On Fri, 30 Mar 2007, Alaerte.Vidali at nokia.com wrote:

> Do you know if there is any hidden issue with this command?
>
> I tried it in 2 IOS versions it was supposed to work, but no support.
>
> Version 12.2(33)SRA1
>
> OSR-1#show system ?
> % Unrecognized command
> OSR-1#show system
>
> Version 12.2(17d)SXB7
> OSR-2#sh system?
> % Unrecognized command
> OSR-2#sh system
>
>
>
> Tks,
> Alaerte
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>