[c-nsp] BERT on PA-MC-STM-1SMI

[David Freedman]

Heya,

Running 12.3 mainline on 72xx with PA-MC-STM-1SMI
have noticed that the BERT results omit useful information,
such as the total data transferred in the BERT session:

#show controllers sonet 4/0.1/3/7/1
SONET 4/0 is up.
SONET 4/0   E1   1/3/7/1 is up
   Framing is none, Clock Source is line.
   BERT test result (done)
      Test Pattern : 2^11, Status : Not Sync, Sync Detected : 1
      Interval : 2 minute(s), Time Remain : 0 minute(s)
      Bit Errors(Since BERT Started): 0 bits,
      Bit Errors(Since last sync): 0 bits

Does the BERT equipment on this card make this data available?
if so, do we need to be running 12.0/12.2S to retrieve this information?

Kind Regards,

David Freedman