[c-nsp] eompls with different vlans at the ends

[liviu.pislaru at gmail.com]

hello,

did everybody use the same vlan id on both ends of the "vlan based eompls 
tunnel" ? is anyone here that use different vlans, who can give me an answer 
to my question ?

thanks,
liviu.

On Tuesday 15 May 2007 15:34, liviu.pislaru at gmail.com wrote:
> hello,
>
> topology:
> Host1 --> switches -->PE --eompls--PE <-- switches <- Host2
>
> config PE (7604 sup 720 / IOS SRA3):
> subinterface + encapulation dot1q vlan X + xconnect (MUX-UNI)
>
> problem:
> if vlan X for Host1 is different then vlan X for Host 2, on the first
> switch connected directly to PE we will have STP bloking state at VlanX.
>
> questions:
> is there a possibility to solve that, except "spann disable on vlan X"
> or "spann bpdu filter enable" on switches, or the same vlan X on both ends
> ? can i filter somehow bpdu throught the eompls tunnel ?
>
> thank you,
> liviu.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/