[c-nsp] Upgrading sup-720 to SRA2

[MKS]

Hello list.

We have been upgrading several sup-720s to SRA2 (from SXE) without any
problems.

But one particular box is not behaving right.

Here below is the console output.


System Bootstrap, Version 8.1(3)
Copyright (c) 1994-2004 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 524288 Kbytes of main memory

Autoboot executing command: "boot disk0:s72033-advipservicesk9_wan-
mz.122-33.SRA2.bin"
Loading image, please wait ...


Self extracting the image... [OK]
Self decompressing the image :
####################################################################################################################
[OK]

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software, s72033_sp Software (s72033_sp-ADVIPSERVICESK9_WAN-M),
Version 12.2(33)SRA2, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Thu 30-Nov-06 14:12 by prod_rel_team
Image text-base: 0x401012FC, data-base: 0x41608000


00:00:05: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging
output.

00:00:05: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor

00:00:07: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console
debugging output.

00:00:05: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure
console debugging output.

00:00:07: %OIR-SP-6-CONSOLE: Changing console ownership to route processor



System Bootstrap, Version 12.2(17r)S2, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2004 by cisco Systems, Inc.
Cat6k-Sup720/RP platform with 524288 Kbytes of main memory



Then it just stops.



Can someone recommend steps to debug this issue?

Regards
MKS