[c-nsp] Upgrading sup-720 to SRA2

[Matt Martini]

MKS,

Try booting into rom-monitor and check your boot variables.  You may  
need to do this for both
the sp and rp.

Matt


__________________________ http://www.invision.net/  
_______________________

Matthew E. Martini, PE        InVision.com, Inc.   (631) 543-1000 x104
Chief Technology Officer      matt at invision.net    (631) 864-8896 Fax
_______________________________________________________________________p 
gp_




On May 18, 2007, at 8:08 AM, MKS wrote:

> Hello list.
>
> We have been upgrading several sup-720s to SRA2 (from SXE) without any
> problems.
>
> But one particular box is not behaving right.
>
> Here below is the console output.
>
>
> System Bootstrap, Version 8.1(3)
> Copyright (c) 1994-2004 by cisco Systems, Inc.
> Cat6k-Sup720/SP processor with 524288 Kbytes of main memory
>
> Autoboot executing command: "boot disk0:s72033-advipservicesk9_wan-
> mz.122-33.SRA2.bin"
> Loading image, please wait ...
>
>
> Self extracting the image... [OK]
> Self decompressing the image :
> ###################################################################### 
> ##############################################
> [OK]
>
>               Restricted Rights Legend
>
> Use, duplication, or disclosure by the Government is
> subject to restrictions as set forth in subparagraph
> (c) of the Commercial Computer Software - Restricted
> Rights clause at FAR sec. 52.227-19 and subparagraph
> (c) (1) (ii) of the Rights in Technical Data and Computer
> Software clause at DFARS sec. 252.227-7013.
>
>            cisco Systems, Inc.
>            170 West Tasman Drive
>            San Jose, California 95134-1706
>
>
>
> Cisco IOS Software, s72033_sp Software (s72033_sp- 
> ADVIPSERVICESK9_WAN-M),
> Version 12.2(33)SRA2, RELEASE SOFTWARE (fc4)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2006 by Cisco Systems, Inc.
> Compiled Thu 30-Nov-06 14:12 by prod_rel_team
> Image text-base: 0x401012FC, data-base: 0x41608000
>
>
> 00:00:05: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console  
> debugging
> output.
>
> 00:00:05: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor
>
> 00:00:07: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console
> debugging output.
>
> 00:00:05: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to  
> ensure
> console debugging output.
>
> 00:00:07: %OIR-SP-6-CONSOLE: Changing console ownership to route  
> processor
>
>
>
> System Bootstrap, Version 12.2(17r)S2, RELEASE SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 2004 by cisco Systems, Inc.
> Cat6k-Sup720/RP platform with 524288 Kbytes of main memory
>
>
>
> Then it just stops.
>
>
>
> Can someone recommend steps to debug this issue?
>
> Regards
> MKS
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/