[c-nsp] Version of Cisco IOS not supported on NPE300

[Saku Ytti]

On (2007-05-25 13:32 -0400), David Coulson wrote:

> The issue is that the NPE-300 is now EOLed - It'll work fine (in 
> theory), but they don't test new images on that NPE. Either stick with 
> an older release, get a new NPE, or just cross your fingers.

There is no additional bonus in sticking to old IOS. You get
same level of support for old and new IOS. Even in new IOS
you get support, if problem is IOS related, if it's found to
be NPE300 related issue, then you'll get cold shoulder.


> 
> Samit wrote:
> > Hi,
> >
> > I just tried to upgraded my cisco7206vxr with NPE300 with image
> > c7200-p-mz.123-22.bin but while booting it gives warning.
> >
> > --------------------------------------------------------------
> >
> > This Version of Cisco IOS Software is not supported on NPE300.
> >
> > Please select a version of Cisco IOS software compatible with
> >
> > this processor from http://www.cisco.com.
> >
> > --------------------------------------------------------------
> >
> > I didn't find anywhere in the cisco site that particular IOS is
> > supported in specific NPE.
> >
> > Does anyone know which version of service provider image shall i use?
> >
> > Regards,
> > Samit
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >   
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
  ++ytti