[c-nsp] NTP Support Missing?

[Mike Louis]

SNTP is basically a client mode only NTP. It works with NTP servers just fine. Same thing happened on the aironet access points during code upgrades (autonomous).

________________________________________
From: cisco-nsp-bounces at puck.nether.net [cisco-nsp-bounces at puck.nether.net] On Behalf Of Paul Stewart [paul at paulstewart.org]
Sent: Thursday, November 01, 2007 11:25 AM
To: 'Church, Charles'; 'Cisco-NSP Mailing List'
Subject: Re: [c-nsp] NTP Support Missing?

Thanks.. yeah I just checked and you're correct... guess we'll need to setup
sntp then - we have a LOT of these 850 series in the field at SOHO customers
;)



-----Original Message-----
From: Church, Charles [mailto:cchurc05 at harris.com]
Sent: Thursday, November 01, 2007 11:20 AM
To: Paul Stewart; Cisco-NSP Mailing List
Subject: RE: [c-nsp] NTP Support Missing?

Paul,

        I've usually found that if NTP is missing, then SNTP is there
instead.  Granted it's not the same, but I'm guessing they're working in the
confines of RAM, etc.  I seem to remember the 1600 and 1700s being in the
same boat.

Chuck




_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure.  If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited.  If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately.