[c-nsp] Ethernet over T1 solution

[Andy Lamontagne]

MLPPP over xDSL.. Lots of T1s are actually delivered over SHDSL.  Same
"quality", just different SLA

On Nov 8, 2007 10:07 PM, Dan Armstrong <dan at beanfield.com> wrote:

> ATM :-)
>
>
>
>
> Justin Shore wrote:
> > Does anyone have any suggestions for a scalable and inexpensive Ethernet
> > over T1 solution?  By scalable I mean able to bond multiple T1s as well
> > as some sort of solution on the CO-end for either mapping individual
> > bonded connections into a VLAN or something.  I expect to start rolling
> > out many more T1s in the near future to replace slow and less reliable
> > DSL and cable connections.  Currently we have so few business T1s that I
> > can terminate them individually but I expect a lot more in the future.
> > I would also like to be able to offer our customers an option other than
> > buying or leasing a router with a T1 interface.
> >
> > Allied
> > Anda
> > Zhone
> > RAD
> >
> > Any other recommended options?  I see a number of options that involve a
> > device on either end of a TDM link but I have yet to find one where the
> > CO-end is scalable to cover multiple CPEs.
> >
> > Thanks
> >   Justin
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>