[c-nsp] Protocol Errors

[Paul Stewart]

I guess the only way to tell is to get a sniffer inline somewhere and see
what's on the wire..... thanks .... 

-----Original Message-----
From: Church, Charles [mailto:cchurc05 at harris.com] 
Sent: Wednesday, November 14, 2007 1:02 PM
To: Paul Stewart; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] Protocol Errors

It's hard to tell if that an input or an output error.  If it's input, is it
possible you're receiving protocols you don't have configured - IPX,
Appletalk, IPv6, some other ethercode?  Something to do with the PPPOE
maybe?

Chuck

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Paul Stewart
Sent: Wednesday, November 14, 2007 12:45 PM
To: 'Holtz,Robert'; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Protocol Errors


Thanks..

When I "spot check" a bunch of other 7206's we never ever see "Unknown
Protocol" errors.... I guess because we've never seen them before had me
wondering what's going on...;)