[c-nsp] Weird Error Message in 'sho ver' on GSR after upgrade

[Michael K. Smith - Adhost]

Hello Sasha:

Done and done.  The show mbus can-error had all zero values and the
clear command didn't seem to alter anything.  The router seems to be
doing what it's supposed to do so I'm not sure that this is a big deal.

Regards,

Mike

> -----Original Message-----
> From: Sascha E. Pollok [mailto:nsp-list at pollok.net]
> Sent: Thursday, November 15, 2007 1:32 AM
> To: Michael K. Smith - Adhost
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Weird Error Message in 'sho ver' on GSR after
> upgrade
> 
> Mike,
> 
> hm... I am not too sure but afaik the MBUS is a CAN bus. Could
> you do a "show mbus can-error" ? And maybe try a
> "clear mbus-statistics" afterwards.
> 
> Regards
> Sascha
> 
> On Thu, 15 Nov 2007, Michael K. Smith - Adhost wrote:
> 
> > Hello All:
> >
> > I just upgraded from 12.0(28)S to 12.0(32)S8 on a 12008 and I'm now
> see
> > this message in a show version.
> >
> > WARNING: Non-zero CAN jam reset counter in slot 18
> > WARNING: Non-zero CAN jam reset counter in slot 19
> > WARNING: Non-zero CAN jam reset counter in slot 20
> >
> > Those are the Switch Fabric Cards.  I've searched on CCO but there's
> > nothing that matches.  Does anyone know what these mean?
> >
> > Regards,
> >
> > Mike