[c-nsp] Weird Error Message in 'sho ver' on GSR after upgrade
Tiago Cunha
cunha.tiago at gmail.com
Thu Nov 15 06:11:34 EST 2007
Hi Mike,
I had seen that issue in the past also after an IOS upgrade.
That kind of counters keep track of failures occurred in the past and may
show up even after the root cause has been fixed. So, these counters will be
non-zero due to an issue which occurred in the past.
My suggestion is to you clear the counters issuing:
router# test mbus clear-jam-counts <slot #>
If afterwards, it would show up again, probably you have some cards/faulty
hardware.
Regards,
Tiago
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Michael K. Smith -
Adhost
Sent: quinta-feira, 15 de Novembro de 2007 9:28
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Weird Error Message in 'sho ver' on GSR after upgrade
Hello All:
I just upgraded from 12.0(28)S to 12.0(32)S8 on a 12008 and I'm now see
this message in a show version.
WARNING: Non-zero CAN jam reset counter in slot 18
WARNING: Non-zero CAN jam reset counter in slot 19
WARNING: Non-zero CAN jam reset counter in slot 20
Those are the Switch Fabric Cards. I've searched on CCO but there's
nothing that matches. Does anyone know what these mean?
Regards,
Mike
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list