[c-nsp] IOS 12.0(32)SY3/4

[Hank Nussbacher]

On Fri, 23 Nov 2007, hjan wrote:

> Hi,
> does anyone know why ip multicast rate-limit is not supported  in those
> release ?
>
> GSR1 Version 12.0(28)S6
> GSR1(config-if)#ip multicast ?
>  boundary    Boundary for administratively scoped multicast addresses
>  helper-map  Broadcast to Multicast map OR Multicast to ip-address map
>  rate-limit  Rate limit multicast data packets
>
> GSR2 Version 12.0(32)SY4
> GSR2(config-if)#ip multicast ?
>  boundary    Boundary for administratively scoped multicast addresses
>  helper-map  Broadcast to Multicast map OR Multicast to ip-address map
>
> Are there other methods to limit multicast output from an interface ?

See:
http://www.nanog.org/mtg-0510/pdf/kristoff.pdf

-Hank

>
> Regards,
> Gianluca
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>